User's Manual

Follow the instructions:
• Web-based browser access to the DECT application
• Web Administrator Login
• Opening the Web current Status
• Opening the web System navigator
3. Open the DECT Systems Properties dialog box.
From the File menu, click on Properties, and click on the General tab.
4. Change the DECT system name.
Enter the new name in the DECT System Name box.
Changing the IP address on DMC DECT manager
Before changing the IP
address on the DMC DECT manager, close the connection. After the
change on the DECT system, open the connection as a safety check.
Figure 179: DECT Systems window and DECT System Properties - Communication tab
Complete the following steps.
Changing the IP
address on the DECT system
1. Using Windows, login to DMC DECT Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
System administration
254 DMC DECT Fundamentals August 2012
Comments? [e-mail]