User's Manual

Note:
Select a single DECT handset, a list of DECT handsets, or all DECT handsets
on a DMC.
Highlight a DMC TN and an Index (or more than one index) in the list.
5. Disable the DECT handset subscriptions.
From the Operations menu, click on Force Disable.
6. Disable from this system only.
Click on OK button.
7. Disable from all systems where the portable set is subscribed.
Click OK.
Deleting TNs that are not on the switch
T
o remove configured sets (TRN status) that are no longer on the switch, perform the following
steps
Removing configured sets
1. Using Windows, log in to DMC DECT Manager. Select the system that supports the
DECT system. Launch the DECT application. Open the DECT Systems window.
Follow the instructions in
Logging into the DMC DECT Manager on page 229 and
Selecting the PBX that supports DECT on page 230.
2. Open the Subscriptions window.
3. Open the DECT Move Subscription dialog box.
From the Edit menu, click Global update.
4. Select the sync status SSTAT.
Set Old value to the current status. Set New value to NEW.
5. Delete the TNs from the switch.
Note:
Perform this procedure after 500 analogue
TNs have been converted to concentrated
TNs.
Deleting TNs that are not on the switch
DMC DECT Fundamentals August 2012 245