User's Manual

Customers must use UTP Cat 5 faceplate cables supplied by Avaya. Faceplate
termination must be used on the DMCs at both ends of the faceplate cabling.
Faceplate cabling between DMC(-E) cards is slightly different for different Avaya CS 1000
system types. The following are the examples:
IPE Shelves Faceplate Cabling
The following figure describes the faceplate cabling within one IPE shelf.
Figure 11: Faceplate cabling within one IPE shelf
Faceplate cables shown in the picture are:
a DMC to DMC faceplate cable (NTCW11AA)
b DMC to DMC-E faceplate cable (NTCW11BA)
c DMC faceplate termination (NTCW11DA)
d DMC bypass faceplate cable (NTCW11CA
Inter-shelf faceplate connections
The following figure describes the IPE inter-shelf faceplate cabling.
Mobility card (DMC8)
DMC DECT Fundamentals August 2012 23