Manualshelf

User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DMC DECT Fundamentals - Communications Server 1000
221222223224225226227228229230
Figure 156: DMC window and DECT Board properties dialog box
When you have confirmed that the software package on the DMC4 relay card is correct,
activate this firmware on all DMC4 cards. Complete the following steps to activate the firmware
on the DMC4 cards.
Activating the firmware on DMC4 cards
1.
Re-connect the faceplate cables from the relay card to the adjoining DMC4 cards.
2. From the Firmware menu, select Activation.
After the firmware has been activated, ensure that the Active Software Package on
all DMC4 cards corresponds to the 45100xxx.dwl firmware. See
Figure 158: DMC
window on page
224.
Upgrade a DECT system to an SNMP-managed system
DMC DECT Fundamentals August 2012 223