User's Manual

Figure 155: DECT Systems window and a synchronize dialog box
With the DMC DECT
Manager connected to the system, store the system data in the DMC
DECT Manager database by clicking the Update DECT Manager button on all synchronization
dialog boxes.
Activate the firmware on all DMC4 cards
Confirm the active software package on the DMC4 relay card (see
Figure 156: DMC window
and DECT Board properties dialog box on page 223
). This must be the same 45100xxx.dwl
firmware that was loaded earlier.
If it is not the 45100xxx.dwl firmware, you must reload the firmware by selecting Upload from
the Firmware menu on the DECT Systems window (see
Figure 157: DECT Systems
window on page 224). Choose the file you want to upload.
The DMC4 card reboots. You must
then re-connect to the DECT system.
Installation and configuration
222 DMC DECT Fundamentals August 2012
Comments? [e-mail]