User's Manual

Figure 154: DOS window running the back-end process - new DECT site using serial connection
You can now connect to the new DECT system.
When connecting, the following sequence of messages appear at the bottom of the DECT
systems window:
Connecting The connection to the remote MODEM has been established successfully
Connecting Authenticating onto the DECT system
Connected Connections opened
Connected Synchronization with the DECT System completed
Note:
If there is a problem connecting to the system and the error seen on the back-end process
window is related to the
Authentication process, try resetting the DMC4 relay card password
to correct the error.
Synchronize data with the DECT system
When the DMC DECT
Manager connects to the DECT system, synchronization occurs. The
DMC DECT Manager database can be updated with the DECT system data.
When the DECT system is connected, there is a red icon on the toolbar. See
Figure 155: DECT
Systems window and a synchronize dialog box on page 222.
Upgrade a DECT system to an SNMP-managed system
DMC DECT Fundamentals August 2012 221