User's Manual

Figure 9: DMC-E to DMC-E intershelf faceplate cable
Caution:
Service Interruption
The DMC-E to DMC-E faceplate cable has four sets of movable ferrites.
The
position of the ferrites on the cable is important. Each end of the cable must have
a group of 20 ferrites. One quarter the distance from each end of the cable must
have a group of 10 ferrites. The maximum length of the cable is 1.5 meters,
limiting the position of DECT shelves 0 and 1 to adjacent IPE modules or CS
1000E cabinets/chassis.
6. DMC to DMC 1-meter faceplate cable with four ferrites (NTCW11FA)
This cable extends the 20Mb/s bus to all DMCs and is used in Avaya
Communication Server 1000E systems to connect DMC cards in MG1000E Main
Chassis and MG1000E Expander Chassis.
Figure 10: DMC to DMC 1 meter faceplate cable with four ferrites
Caution:
Service Interruption
Product description
22 DMC DECT Fundamentals August 2012
Comments? [e-mail]