User's Manual

DAS configuration
It is necessary to configure the DECT
Access System (DAS). You must first add the DECT
system to DMC DECT Manager.
Adding the DECT system to DMC DECT Manager
1. Launch the DMC DECT Manager application.
2. Select File > Add.
3. Enter the DECT System Name on the General tab of the DMC DECT Manager -
DECT System Properties window. See
Figure 150: DMC DECT Manager - DECT
System Properties window on page 217.
Figure 150: DMC DECT Manager - DECT System Properties window
4.
Click Apply.
5. Click the Communication tab to select it. See
Figure 151: DECT System Properties
- communication tab on page 218
.
Upgrade a DECT system to an SNMP-managed system
DMC DECT Fundamentals August 2012 217