User's Manual

The Completing the Network Connection Wizard window opens. See Figure 147:
Completing the Network Connection Wizard on page 214
.
12. Type a name for the connection.
Figure 147: Completing the Network Connection Wizard
13.
Click Finish.
14. Choose a username and password for the connection.
15. Click Close.
16. Restart the PC.
Change the DMC4 relay card default IP address
Important:
The DMC4 card has a default IP
address of 192.168.1.1. This DMC4 address must be
changed to conform to the network IP address plan.
Reset the DMC4 relay card to the server IP address
Open
Telnet on the PC that is used for configuring. Connect to the default DMC4 IP address
(192.168.1.1).
Figure 148: Telnet to 192.168.1.1 on page 215
shows the Telnet session.
Installation and configuration
214 DMC DECT Fundamentals August 2012
Comments? [e-mail]