User's Manual

Figure 141: Change Default Preferences - Advanced tab
9.
Define Hardware Settings on the Advanced tab:
a. Set the Data bits to 8.
b. Set the Parity bits to None.
c. Set the Stop bits to 1.
10. Click OK.
The modem configuration windows close.
Network and dial-up connections configuration
Configuring the network and dial-up connections
1.
Select Control Panel > Network and Dial-up Connections.
2. Double-click the Make New Connection icon.
The Connection Wizard starts. See
Figure 142: Network Connection Wizard on
page 21
1.
Installation and configuration
210 DMC DECT Fundamentals August 2012
Comments? [e-mail]