User's Manual

Click the Alarm tab.
3.
Enter the IP address.
Type the Upstream manager IP address.
4. Accept the changes.
Click the OK button.
Synchronizing data with DECT
When the DECT
manager connects to DECT, synchronization occurs. Synchronization
compares the database on the manager to the database of the DECT system. Database
mismatches are flagged by dialog boxes. The opportunity to change either the DECT system
data or the manager data is given.
Figure 123: DECT Systems
Complete the following steps:
Synchronizing data with the DECT system
1. If the toolbar icon is red, the connection to the DECT
system is enabled. Disconnect
from the DECT system.
Double-click the icon, or use File>Disonnect. Go to
Synchronizing DECT PARI and
SARI on page 192.
2.
If the toolbar icon is green, re-connect to the DECT system
Double-click the red icon, or use File>Connect.
Synchronizing data with DECT
DMC DECT Fundamentals August 2012 191