Manualshelf

User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DMC DECT Fundamentals - Communications Server 1000
181182183184185186187188189190
Connecting the DMC8 Relay card to a Captive LAN
1. If the DMC8 Relay card was configured on a captive LAN, remove the NTCW12DA
Ethernet cable from the captive LAN.
Disconnect P3 from the captive LAN RJ45 connector.
2. Connect the NTCW12DA cable to the DMC DECT Manager Server Dedicated
LAN.
Insert P3 into the Dedicated LAN RJ45 connector.
Launching the DECT application
Launching the DECT application
1.
Launch the DMC DECT Manager
2. Select an existing PBX and click OK.
Launching the DECT application
DMC DECT Fundamentals August 2012 187