User's Manual

Remove the packing material.
2.
Install the DME.
Carefully position the daughterboard over the four standoff posts and press onto
the DMC8 relay card.
Changing the DMC8 Relay card default IP address
Connecting the DMC8 Relay card to a configuring PC
Caution:
Service Interruption
The DMC8 is shipped with a default IP
address 192.168.1.1. The default address must be
changed to conform to the network IP address plan.
Figure 117: NTCW12DA Ethernet cable to configuring PC connections
Note:
The configuring PC can be the DMC DECT
Manager server or another PC. If the configuring
PC is the DMC DECT Manager server, the Captive LAN shown in
Figure 117: NTCW12DA
Ethernet cable to configuring PC connections on page 184
is the DMC DECT Manager
Server Dedicated LAN shown in
Figure 93: DMC8 Relay card to basestation connections on
page 161
.
Installation and configuration
184 DMC DECT Fundamentals August 2012
Comments? [e-mail]