User's Manual

Figure 113: Synchronize DECT Radio Fixed Part Configuration Mismatch dialog box
Figure 113: Synchronize DECT Radio Fixed Part Configuration Mismatch dialog box on
page 182 shows Radio Fixed Parts (basestations) listed in theDMC DECT
Manager Application
database that are not operational on DECT. Delete the check in the check boxes. This allows
the basestations no longer required in the DMC DECT Manager Application database to be
removed.
Figure 114: Synchronize Radio Fixed Part Settings Mismatch dialog box
A
Power Source/Alarm Muting setting was changed by another manager.
Figure 114:
Synchronize Radio Fixed Part Settings Mismatch dialog box on page 182 says that the DMC
DECT
Manager Application database automatically updates to match the changed settings.
Figure 115: Synchronize DECT Upstream Manager IP Address Mismatch dialog box
If there is an Upstream Manager IP
address mismatch between the DMC DECT Manager
Application database and the DECT system database, the mismatch dialog box enables an
update of the Upstream Manager IP address on both the connected DECT system and the
Installation and configuration
182 DMC DECT Fundamentals August 2012
Comments? [e-mail]