User's Manual

Figure 111: Synchronize DECT Parameters Mismatch dialog box
If there is a Parameter mismatch between the DMC DECT
Manager Application database, and
the DECT system database, the mismatch dialog box enables the update of Parameters on
both the connected DECT system and the DMC DECT Manager Application. See
Figure 111:
Synchronize DECT Parameters Mismatch dialog box on page
181.
Figure 112: Synchronize DECT Board Configuration Mismatch dialog box
Figure 112: Synchronize DECT Board Configuration Mismatch dialog box on page 181
shows
DMC TNs (Boards) listed in the DMC DECT Manager Application database that are not
operational on the DECT system. Delete the check in the check boxes. This allows the DMCs
that are no longer required in the DMC DECT Manager Application database to be removed.
Installing the DMC DECT application
DMC DECT Fundamentals August 2012 181