User's Manual

1. When the File menu or tool button is used to connect. The synchronization can be
controlled through dialog boxes.
2. When the DMC DECT Manager re-establishes a permanent connection to DECT.
A synchronization report is available in the Event log in the DMC DECT Manager
server.
When connecting to a DECT system that has data that does not match the DMC DECT
Manager Application data, do one of the following:
• Update the DMC DECT Manager Application database from DECT data.
• Update DECT data with the DMC DECT Manager Application database.
Figure 110: Synchronize DECT PARI and SARI Mismatch dialog box
If there is a P
ARI or SARI mismatch between the DMC DECT Manager Application database,
and the DECT database, the mismatch dialog box enables the update of PARI and SARI
parameters on both the connected DECT system and the DMC DECT Manager Application.
See
Figure 110: Synchronize DECT PARI and SARI Mismatch dialog box on page 180
.
Installation and configuration
180 DMC DECT Fundamentals August 2012
Comments? [e-mail]