User's Manual

Installing DMC8 and DMC8-E in an Avaya Communication Server
1000E
Consult the work order and marked-up floor plan to determine the position of the DMC8 and
DMC8-Es, then perform the steps in Installing DMC8 and DMC8-E in a Cabinet or Chassis on
page
171.
Voltage:
Electrostatic Sensitive Device
W
ear a properly connected antistatic wrist strap when handling circuit cards. Handle cards
by the edges only. Do not touch the contacts or components. Set the cards on a protective
antistatic bag, whenever possible. If an antistatic bag is not available, hand-hold the card,
or set it in a card cage unseated from the connectors.
Caution:
Service Interruption
Do not install DMC8-Es into any slot except slot 8.
Note:
The DMC8s must be adjacent to each other so the faceplate cables can be connected to
the ports.
Note:
See System software parameters on page 41 for DMC8 and DMC8-E software package
compatibility
.
Installation and configuration
170 DMC DECT Fundamentals August 2012
Comments? [e-mail]