User's Manual

For shelf 0, the lower TN IPE shelf, strap B C. For shelf 1, the higher TN IPE shelf,
strap
A B.
4. Install J6 to J9 jumper straps on the DMC8 and the DMC8-Es used as the Relay
card for either V.24 connection or Ethernet connection.
For the V.24 connection, strap jumpers J6 to J9 to the V24 position. For the Ethernet
connection, strap jumpers J6 to J9 to the ETH position.
5. Insert DMC8-Es, if required.
Place DMC8-Es in slot 8.
6. Insert DMCs.
Place DMC8s in the slots as indicated on the work order. Do not place DMC8s in
slot 8.
Installation and configuration
164 DMC DECT Fundamentals August 2012
Comments? [e-mail]