User's Manual

NT8D37 from 16 pair to 24 pair, see Avaya Communication Server 1000M and
Meridian 1: Large System Installation and Commissioning (NN43021-310).
Installing DMC8 and DMC8-E in an IPE shelf
Refer to the work order and marked-up floor plan to determine the position of the DMC8 and
DMC8-E, then perform the steps in Installing DMC8 and DMC8-E in an IPE shelf on
page 163.
Voltage:
Electrostatic Sensitive Device
W
ear a properly connected antistatic wrist strap to handle circuit cards. Only touch the
edges. Do not touch the contacts or components. Set the cards on a protective antistatic
bag, whenever possible. If an antistatic bag is not available, hand-hold the card, or set it in
a card cage removed from the connectors.
Caution:
Service Interruption
Only install DMC8-Es in slot 8.
Note:
Install the DMC8s next to each other so the faceplate cables connect to the ports.
Note:
See System software parameters on page 41 for DMC8 and DMC8-E software package
compatibility
.
Installation and configuration
162 DMC DECT Fundamentals August 2012
Comments? [e-mail]