User's Manual

For BIX MDF, refer to Figure 92: Meridian 1 PBX 11C Cabinet on page 157 to locate
the BIX connectors and Table 37: Colour code for 25 pair cable on page 156
to
locate the cable colour code.
Expander installation
For information on installing an Expander
, refer to Avaya Communication Server 1000M and
Meridian 1: CS 1000E Installation and Commissioning (NN43011-310).
Installing DMC8 and faceplate cables
Installing the DMC8 cards and faceplate cables involves the following tasks:
1.
Cross-connect basestations to the DMC8 positions.
2. Cross-connect basestations to the DMC8 Relay card.
3. Install DMC8 and DMC8-E in an IPE shelf.
4. Install DMC8-E in a Cabinet system.
5. Install faceplate cables and inter-shelf/cabinet cable.
Compatibility
The NTCW00AB DMC8 and NTCW01AB DMC8-E are compatible with the following software
releases:
•
Release 23 and later supports basic configuration, CLID and CPND, DECT card
addressing within OA&M, 16 users per card.
• Release 24B and later supports 32 users per card.
• Release 25 and later supports MSMN and Concentration.
Cross-connecting basestations to the DMC8 positions
Consult the work order to determine the cross-connect details and perform the following
steps.
Caution:
Service Interruption
Installation and configuration
158 DMC DECT Fundamentals August 2012
Comments? [e-mail]