User's Manual

backplane clock between two MG1000 chassis, MG 1010 chassis, or Option 11C cabinets, are
shown in the figures below.
For CS 1000E DECT installations that span more than 1 cabinet, the NTDW63AAE5 (Option
11C Cabinet Ethernet & Clock Reference Breakout Adapter) is used with the NTDW67AAE5
(Clock Reference Cable) to synchronize the backplane clock between two Option 11C
cabinets. For DECT installations that span more than 1 MG 1000 or MG 1010 main and
expander chassis, the NTDW67AAE5 cable is used to synchronize the backplane clock
between two MG 1000 or MG 1010 chassis. This is in addition to the clock controller
requirement identified above.
Overview
DMC DECT Fundamentals August 2012 15