User's Manual

delivered with the outdoor cabinet. Also connect the CAT5 cable that is inside the
outdoor cabinet to the connector box.
9.
Connect the Ethernet CAT5 cable to the C4010E basestation. Place the C4010E
basestation in the outdoor cabinet and install the foam.
10. Connect the antenna cables to the antenna.
11. Place the cover foam in position then place the antenna in the foam.
12. Close and lock the outdoor cabinet.
Important:
Ensure that the C4010E basestation is line powered through the Ethernet cable.
Local power provision is not possible in this outdoor cabinet.
Mounting the cabinet
This section describes the following procedures:
•
Mounting the cabinet to the wall
• Mounting the cabinet to a pole
Mounting the cabinet to the wall
1. Mount the wall mount set on the back of the cabinet.
Choose for horizontal or vertical mounting of the wall mount set.
2. Use the drilling jig (suitable for horizontal or vertical configuration) for the position
of the drill holes.
3. Mount the cabinet to the wall.
Installing the external housing
DMC DECT Fundamentals August 2012 149