User's Manual

Creating a table to document telephone types in a cell
1. Make a Telephone types table.
2. Label the row, User telephone types and include as many columns as there are cell
centres.
3. Label each column heading with the cell centre indicator.
The information in this table is used to determine the number of cells that require
re-engineering.
Determining cell re-engineering
T
able 23: Example of a completed estimate table
Estimate for: 1C1 1C2 1C3 1C4 1C5 1C6 1C7
Users inside the cell with
an of
fice
8.4 0.7 21.0 14.7 0.7 4.9 2.1
Users with an office
outside of a cell who walk
into the cell
3.2 3.7 2.3 2.7 3.7 3.4 3.6
Users without an office 0 0 0 0 0 0 0
Users in a cell 11.6 4.4 23.3 17.7 4.4 8.3 5.7
Table 24: Example of a completed telephone types table
Telephone type 1C1 1C2 1C3 1C4 1C5 1C6 1C7
User telephone types H&W H&W M M H&W H&W H&W
Table 25: Cell re-engineering
Estimate for:
Users with both a
handset and a wired
telephone
Users with only a handset Action
From 0 up to 20 From 0 up to 12 Keep cell size as deployed.
Greater than 20 but no
more than 80
Greater than 12, but no more
than 40
Install a 12-channel
basestation or sub divide the
cell
a
.
Greater than 80 Greater than 40 Sub divide the cell
a
to meet the
above conditions.
The cell re-engineering process
DMC DECT Fundamentals August 2012 113