User's Manual

Separating the coverage area and recording the number of offices
Figure 66: Example of dividing the coverage area and recording offices
Separating the coverage area and record the number of offices
1.
Divide the floor plan into cell areas.
Mark the cell areas on the floor plan, one area for each cell, splitting cell overlap
areas in half. Shown in
Figure 66: Example of dividing the coverage area and
recording offices on page
108 as heavy dotted lines.
2. Count the number of user offices in each cell area.
Record the number of user offices on the floor plan in each cell area.
Creating an estimate table
Use this table later to estimate the number of handset users for each cell.
T
able 16: Estimate users in a cell
Estimate for: 1C1 1C2 1C3 1Cn
Users inside the cell with an office
Users with an office outside of a cell
who walk into the cell
Site planning
108 DMC DECT Fundamentals August 2012
Comments? [e-mail]