User's Manual

DAP deployment 67
Figure 42
Deployment Kit 2 basestation
DAP deployment
To deploy a DECT system follow Procedure 12 “Deploying a DECT
system” (page 67).
Procedure 12
Deploying a DECT system
Step Action
1 Identify and mark initial critical points.
Mark critical initial points on the floor plan with the following
symbol.
Figure 15 "Example of initial critical points" (page 43) shows the
initial critical points: P1, P2, P3, P5, P6 and P7.
2 Demarcate the cell contour for the critical point farthest from the
center of the full coverage area.
To demarcate a cell contour, perform the following.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.