User's Manual
Deployment tool 61
3 Select system mode.
Press the shift key and press the local key. The handset
displays SYSTEM.
4 Select the monitor mode.
Press the star (*) key. The handset displays MONITOR MODE.
5 Select the monitor mode code.
Press the lock button. The handset displays CODE.
6 Enter the monitor mode code.
On the dial pad, enter 2530. Press the lock button.
7 Interpret the handset RSSI display and test tone.
Follow the explanation in “How the deployment tool works” (page
61) and “Using the deployment tool” (page 62).
--End--
How the deployment tool works
The deployment tool basestation and the deployment handset establishes
a radio link under the following circumstances.
• the handset is in the deployment mode
•
the handset and basestation are within range of one another
The closer the handset is to the basestation the stronger the link. As the
handset moves away from the basestation, a point is reached where the
signal is no longer reliable for telephone conversations.
After a link is established, the handset emits a continuous 1.4kHz tone and
displays a Radio Signal Strength Indication (RSSI).
Figure 39
Deployment handset link display
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.