User's Manual

Use the Location builder tool 245
15 To move a DAP to the Map, simply drag it onto the Map. If you
accidentally release a DAP on the wrong position, you can
reposition it.
You can remove a DAP from the map, and put it back in the DAP
list. To do so, right-click on the DAP, and choose the menu item
Move To.
After you place a DAP on the Map, an autonumber function for
the Info field is activated. This function only works if the following
two items are true.
The previous DAP added must have an Info field in the
form {current floor number}{string}{number}, for
example 0R05. These are the notations as used in the Site
Survey, consult therefore the Site Survey manual for more
info on these notations.
The current DAP must have an empty Info field.
If both these requirements are met, the current DAP
gets an Info field assigned in the form {current floor
number}{string}{number + 1}, for example 0R06. The
following figure shows the RPN data and the Info field data in the
Edit box pane, titled Current DAP.
16 Continue placing the DAPs until the DAP list is empty.
17 To add a DAP manually, right-click a point on the Map, and
select Add DAP from the menu.
The Add DAP dialog appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.