User's Manual

200 System administration
6 Click OK.
If you are exporting subscriptions to a single system, proceed
to step 12.
7 Click Enter SARI.
8 Enter the SARI of the system.
The SARI of the home and remote systems must be the same.
9 Click OK.
10 Click Add Number Range.
The Add Number Range page appears.
11 In the From field, enter the first number in the range of DNs
where you want to export subscription data.
If you are exporting data for one DN only, proceed to step 16.
12 In the To field, enter the last number in the range.
13 Click OK.
14 Click Subscriptions.
The Subscriptions page appears.
15 Select the required available extension number from the list on
the Subscription page, for example, select 5001.
If the number you require does not show, select another page.
The page number is displayed in the top and bottom rows of the
subscriptions table.
16 Click Enable.
The status of the configuring subscription record changes from
"Free" to "Enabled" and the Personal Identification Number (PIN)
appears. A PIN is generated by the DAP manager on each
subscribe operation and appears only while the subscription
status is enabled.
17 Using the handset you are subscribing, access the System
configuration menu, and choose New system.
See the User Guide for the handset for more information
about accessing this menu, and other handset configuration
information.
18 If the handset requests a Portable Access Rights Key (PARK)
code, enter the PARK code.
You can find the PARK code on the left at the bottom of the
page.
Note: A PARK code is required only if there are overlapping
DECT systems in your location; if only one DECT system is
available in your location, a PARK code is not required.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.