User's Manual
Simple SIP DECT configuration 161
If you plan to create a Branch Office Configuration, seePerform
configuration on Element Manager.
--End--
Configuring the signaling server
To configure the Signaling Server using Element manager, follow the steps
in the next procedure.
Procedure 71
Configuring the signaling server
Step Action
1 Select System > IP Network > Node: Server, Media Cards.
The Node Configuration page appears.
2 Select Edit.
3 Select SIP GW Settings and enter Signaling Server NRS IP
address, for example 192.168.100.104, for Primary Proxy or
Re-direct IP address.
4 Select UDP as Transport Protocol.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.