User's Manual
Simple SIP DECT configuration 153
2 Select the required available extension number or numbers.
If the required number is not visible, select another page. The
page number is displayed in the top and bottom rows of the
subscriptions table.
3 Click Enable.
The status of the configuring subscription record changes
from "Free" to "Enabled" and the PIN is shown. A Personal
Identification Number (PIN) is generated by the DECT manager
on each subscribe operation and only displayed while the
subscription status is enabled.
It is also possible to disable and terminate subscriptions. For
more information about subscription management see the
section “Subscription management” (page 187).
A DECT handset is required for the remainder of this procedure.
4 Find System configuration in the DECT handset menu.
5 Choose New and enter the displayed PIN code.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.