User's Manual

140 System configuration
3 Enter the DAP controller Configuration: DC IP address, which
is the PC IP address where your DAP controller is installed. An
example of this address is 192.168.100.10.
ATTENTION
The DAP Controller PC must have a static IP address and be in the
same subnet as the DAPs. If the DAP Controller PC is in a different
subnet, you must configure the Routed Head Quarter. See “Routed
Head Quarter configuration” (page 173).
4 Enter the Proxy IP address, which is the Signaling Server Node
IP, for example, 192.168.100.105.
5 Click Apply.
--End--
Procedure 49
Configuring Network Settings
Step Action
1 In the Settings section, click the Network Settings button.
The IP DECT Configurator Network Settings window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.