User's Manual

DAP controller software 129
5 Click OK to save changes.
--End--
DAP configuration without DHCP or TFTP servers You can set up
DAP configuration without DHCP or TFTP servers using the Network
Settings window of the IP DECT Configurator.
Use the following procedure to configure a DAP to store IP address and
the configuration data.
Procedure 44
Storing IP address and configuration data on a DAP
Step Action
1 Start the IP DECT Configurator and select Modify the system.
2 Choose the system to modify.
3 Click More.
4 Select the check box next to DAP Boot Options.
5 Select Store IP configuration into flash memory.
6 Click Apply.
7 Click the Save system button in the left section.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.