User's Manual
106 Software requirements
6 Insert the Windows CD-ROM and follow the on-screen
instructions.
--End--
Check IIS on PC with Windows 2000
Use the steps in the next procedure to determine whether IIS is started,
and to start it if necessary.
Procedure 31
Checking IIS on PC with Windows 2000
Step Action
1 Open Internet Explorer on the PC where IIS is installed.
2 In the address bar in Explorer, enter localhost/iisHelp/ and then
press enter.
IIS is running if Help Information appears. You are finished with
this procedure.
If you cannot reach the Web server through Internet Explorer,
check Windows Help and search for IIS. Follow the instructions
on Windows Help to check whether or not IIS is started. If IIS is
started, you are finished with this procedure.
If IIS is not started, go to step 3.
3 If IIS is not started after following the instructions in steps 1 and
2 of this procedure, click Start,gotoSettings, and click Control
Panel to start IIS manually. Double-click Administrative Tools
and then double-click Computer Management.
4 Expand the Services and Applications node in the console tree
of the MMC and select Internet Information Services.
5 Click the right mouse button on Internet Information Services
to restart the services. Click the right mouse button on the
lower levels of Internet Information Services to stop or start the
individual services.
--End--
Install and maintain IIS on Microsoft Windows 2003
Use the information in this section to install IIS on Windows 2003, restart
IIS, or verify that IIS is operating.
Installing IIS on a PC with Windows 2003
Use the steps in the next procedure to install IIS function on a PC with
Windows 2003.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.