User's Manual

Chapter 6: Module - eVBVOICE
Important:
Due to the ongoing development of the DECT Messenger product suite, some modules that provide
additional functionality may become available after the initial release of DECT Messenger 4.0.
The following modules are described in this document but are not available at initial General Availability
of Release 4.0.
• eFR
• eLICENSE
• eLOCATION
• eSMS
• eSNMP
• eVBVOICE
The eFR module is an add-on module and is licensed separately through the eLICENSE module. Some
of the modules listed in this attention box are available only on a site-specific basis.
Introduction
Within every eVBVOICE application there are two different call types.
• Inbound calls
In an inbound call where the user dials a specific number related to the eVBVOICE
application, messages can be set (*SET), reset (*RESET), and confirmed (*CONFIRM).
You can also record (*RECORD) wave files related on a specific menu option or recording
general wave files.
• Outbound calls
The eVBVOICE application can set up a call to a device and play a wave file linked to a
specific alarm. The eVBVOICE application is used to inform the device of a user that a
specific alarm is activated. The alarm is audio and not visual.
DECT Messenger Installation and Commissioning — Book 2 March 2012 95