User's Manual

down serial and sockets communications, free resources, clean up garbage, and so on. To
stop the processes gracefully, follow the steps in Shutting down eTM_HA on page 83.
Shutting down eTM_HA
1. Open the eTM_HA pop-up menu.
Right-click the eTM_HA icon in the system tray.
2. Stop the eTM_HA.
• Choose the menu item Task Manager - Stop.
• Choose the menu item Exit.
The following confirmation prompt is shown; do not click OK or Cancel yet:
Note:
The application also responds to a system Log off or Shut down event.
3. Shut down the applications.
Close down all programs using the program specific instructions. In most cases this
means closing the main form of each application by clicking the close box on the
top right of each form. However, some applications require specific shutdown
procedures.
4. Confirm the eTM termination warning dialog box.
Click OK.
Because all associated tasks were already manually ended gracefully, no more
processing is involved.
Any associated tasks still running are terminated through a Terminate process
API-call for each task that is launched from within the eTM and finally shuts down
the eTM module as well.
Check tasks
DECT Messenger Installation and Commissioning — Book 2 March 2012 83