User's Manual

Send SNMP Message for Win32
A sample program of Send SNMP Message is available on the DECT Messenger CD in the
directory 09-Add-ons\Send SNMP Message.
When you install the program, it resides in the directory C:\Program Files\Send SNMP
Message\Exe and is called Send SNMP Message.
When the program is launched, a window appears and defaults to IP address 127.0.0.1 and
port 162. If Send SNMP Message is installed on the same PC as the eSNMP module, the
default value should not be changed. If Send SNMP Message is installed on a different PC,
adjust the IP address and port to match the PC where eSNMP runs.
The window contains several input-capable fields that allow you to configure every parameter.
When you click the Sendbutton, an SNMPv1 trap is sent to eSNMP.
Figure 49: Send SNMP Message
The Send SNMP Message program is provided on an “as-is” basis.
Send SNMP Message for Win32
DECT Messenger Installation and Commissioning — Book 2 March 2012 47