User's Manual

Note:
eWEB stores passwords without encryption in the Access 2000 database, and are therefore
available to anyone who can access the DECT Messengersystem. Depending on your
configuration, table information is accessible through eWEB. Because the security
mechanism is limited, Avaya recommends that users not use the same password used on
other systems that contain secured information, as that poses a serious security risk. Inform
all users of this important issue.
An authorized of an entry typically found in this field is as follows: SOPHO.
USERA_Sec_level_n
The security level is a number between 00 and 99. The higher the number, the more authority
a user has. The value 99 is the highest level, and gives full access to all functionality. The value
00 is the lowest possible value. Avaya recommends that you initially assign values in 2 or 3
levels and handle increment by 10. For instance, start with the following values: 20 for low-end
users, 40 for power users, and 60 for administrators.
Note:
The security level is related to the values specified in the eWEB_TOC table, where the field
WTC_Sec_n level specifies the minimum required user security level that is needed for a
specified function. For authorized, a user with level 20 can execute all the functions in
WTC_Sec_n with level 00–20.
An authorized of an entry typically found in this field is as follows: 40.
USERA_Description_str
This field contains a description of the user, which usually consists of the first and last name
of the User ID. This field is informational only.
An authorized of an entry typically found in this field is as follows: Francis Missiaen.
USERA_Email_str
This field specifies the e-mail address of the user. This field is important when eWEB module
is activated, and the Send SMTP Message function is available to the users. When a user
sends an e-mail message through the Send SMTP Message script, the system checks the
username of the eWEB user, as specified during the login procedure. The e-mail address of
the user is retrieved based on the User ID, and is used in the MAIL FROM tag of the mail
composition process, as defined in the RFC821 specifications.
An authorized of an entry typically found in this field is as follows: [e-mail].
Table: eWEB_USER_AUTH
392 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]