User's Manual

Chapter 48: Table:
eWEB_SCRIPT_TRACE_AUTH
Note:
An alarm is only traceable for script message if the ALA_Trace_b alarm ID related to the script message
has the field ALA_Trace_b in the eKERNEL_ALARM table set to True.
Note:
In the current release, traceable alarms are only supported for script messages.
eWEB_SCRIPT_TRACE_AUTH parameters
Figure 198: eWEB_SCRIPT_TRACE_AUTH parameters
WSTA_Site_id_n
This field specifies the site, as defined in eKERNEL_SITE table. In most environments, the
value is 1.
An authorized of an entry typically found in this field is as follows: 1
WSTA_Area_id_n
This field specifies the area, as defined in eKERNEL_AREA table. In most cases the value is
1.
An authorized of an entry typically found in this field is as follows: 1
DECT Messenger Installation and Commissioning — Book 2 March 2012 373