User's Manual

WSC_Msg_str
This field describes the message that is sent to the group members. Avaya recommends that
you add a descriptive message that allows the recipient sufficient information to handle the
alarm condition. Mobile users often lack immediate access to other information resources, such
as a site map or technical specification. Avaya recommends that you keep the message length
less than or equal to the maximum length defined in the associated eKERNEL_ALARM
table.
*FREE is the only other valid entry. This keyword enables the end user to enter a message.
An authorized of an entry typically found in this field is as follows: EVACUATION is active
WSC_Min_dev_cnt_str
This field specifies the minimum number of devices that must be selected from the group by
the end user, before a script message can be activated. The only other valid entry in the current
release is *ALL; therefore, all devices from the group receive the message, so the end user
does not have the opportunity to select devices.
Warning: you must not specify a value larger then the number of devices present in the
group.
Note:
In the current release, this parameter has nothing to do with the number of devices that must
receive the message before clearing the message for all other devices from the group.
An authorized of an entry typically found in this field is as follows: *ALL
WSC_Max_Active_n
This field specifies the maximum number of times this script message can be active. The
keyword *NOMAX can be used to indicate there is no limit.
An authorized of an entry typically found in this field is as follows: 1 (for EVACUATION) or
*NOMAX (for informative messages)
WSC_Currently_Active_n
This field specifies the number of script messages currently active.
This field is used by the eKernel application, and has nothing to do with configuration of the
database.
eWEB parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 369