User's Manual

Although you are free to enter a numeric value of choice, Avaya recommends establishing a
naming convention for script messages.
In the field ALA_Trace_b of the eKernel_alarm table, the administrator can activate this field
(note that this feature is supported only for script messages in the current release), which
means that the whole call flow is logged in the data database.
An authorized of an entry typically found in this field is as follows: 1
WSC_Script_Descr_str
This field is a description of the script message.
In the eWeb module, the visualization of the script message is performed with the description
of the script message, and never with the script ID.
An authorized of an entry typically found in this field is as follows: EMERGENCY
WSC_GRP_Name_str
This parameter specifies the name of the group as defined in the field GRP_Name_str in the
eKernel_group table or another valid text is *ALL.
If this field is equal to *ALL, the user can select a group, otherwise the group (the message
destinations) are fixed.
The groups are presented as message destinations.
If the group name defined does not match a group name in the eKernel_group table, no devices
are shown, so the alarm is not processed.
An authorized of an entry typically found in this field is as follows: EVACUATION
WCS_ALA_id_n
This field must have a value that corresponds with any of the definitions in the eKernel_alarm
table for input program related to eWEB. For authorized, if eWEB is input program 11701 and
eKernel_alarm table contains alarm identifiers 1170101 and 1170102, one of these defined
values must be used. In most cases, a number of alarm identifiers are defined to handle
different message lengths and different message priorities.
An authorized of an entry typically found in this field is as follows: 1170101
Table: eWEB_SCRIPT
368 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]