User's Manual

eLOCIR_Msg_str
This field defines the message that is used to generate a resulting alarm. The value can be a
combination of constant text and replacement values. The supported replacement values are:
• [Location]: field eLOCRPN_Message_str from eLOCATION_RPN table for the
corresponding RPN (keyword <rpn> in <msgrpy> from eLOCATION
• [Location Date]: value of tag <date> from <msgrpy> from eLOCATION
• [Location Time]: value of tag <time> from <msgrpy> from eLOCATION
• [Calling number]: extension or 'Visual dnr' description of calling device
• [Called number]: extension of called device
The replacement values are parsed by their corresponding value, and SOS from [calling
number] on location [location] at [Location Date] [location time] can result in for authorized,
SOS from 865 on location elevator 2 at 2004.01.27 14:57. Since release 3.0, it is possible to
use a ‘visual DNR’ to a device in the Messenger (new field “DEV_Visual_dnr_str” in table
eKERNEL_DEVICE). Now when the system configurator configures a device with a visual
DNR, this DNR is used to format a message when it contains [Calling number]. The end-user
is confronted with the visual DNR.
An authorized of an entry typically found in this field is as follows: SOS from [calling number]
on [location] at [Location Date] [location time]
eLOCIR_Comments_str
Use this field to enter additional information. It is informational only.
An authorized of an entry typically found in this field is as follows: Default configuration.
eLOCATION_INBOUND_RESULT parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 349