User's Manual

eLOC_Retry_intv_n
This field specifies the interval in seconds, to re-send a location request to the eLOCATION
module when it previously received a negative acknowledge.
An authorized of an entry typically found in this field is as follows: 10
eLOC_Polling_intv_n
This parameter is not implemented in current release. Specify value “0” here.
An authorized of an entry typically found in this field is as follows: 0
eLOC_Comments_str
Use this field to add descriptive text on the instance of the eLOCATION module. For authorized,
identify the physical location of the DCC board in the switch.
An authorized of an entry typically found in this field is as follows: Default configuration.
eLOCATION parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 345