User's Manual

This is a long filename and refers to the filename of the e-mail message that is being
processed. These names were generated by the Microsoft SMTP Server component.
• From field
Isolated from the <x-receiver> tag.
• To field
Isolated from the <x-sender> tag.
• Subject field
Isolated from the Subject: tag.
With these values, the eSMTP_server produces a message request for eKERNEL, as shown
in
Figure 28: eSMTP message request for eKERNEL on page 34.
Figure 28: eSMTP message request for eKERNEL
The eKERNEL then validates the message request, and either accepts or refuses the request.
During the validation process, the eSMTP_server is considered as an input program, so all
configuration settings must be defined correctly. One major criterion is whether for this input
program the auto-create group is activated. Without auto creation of groups, both From and To
must be known in the database.
• Message Accepted
If the message is accepted, a reply is sent, as shown in
Figure 29: Message reply:
accepted on page 34.
Figure 29: Message reply: accepted
Upon receiving this acknowledgement, the eSMTP_server moves the original mail message
to a processed location, unless the target directory is set to a value of *NONE. Figure 30:
Specifying the location to file accepted messages on page 35 shows the target folder for
accepted messages.
Module - eSMTP_server
34 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]