User's Manual

CFG_Site_eKERNEL_port_str
This field specifies a port number. Valid port numbers are in the range between 0 and 65535.
However, Avaya recommends that you avoid using ports in the range of 0 and 1024, as these
ports are likely to used by other applications.
Note:
You can use the NETSTAT command to find out what ports are in use. When all required
service is installed (for authorized, DMSAPI-service, CSTA_service, PC Anywhere, Web
Server, SMTP Server, and so on), you can find out what ports are currently in use. Click Start
in the Windows task-bar and choose Run > cmd. Enter the command NETSTAT/A to display
an overview of TCP/IP ports is use.
The default value 9000 is usually acceptable. Although current release does not implement
eKERNEL-to-eKERNEL communication, the eKERNEL always binds a socket to the port that
is reserved for eKERNEL to eKERNEL traffic in a multi-site configuration. In single site
configurations, you still must enter this value. The eKERNEL module always makes this
sockets connection active, even in single site configurations.
An authorized of an entry typically found in this field is as follows: 9000
CFG_Site_eKERNEL_socket_str
This value specifies the behavior of the socket connection reserved for eKERNEL-to-
eKERNEL communication. You must always specify the value Close after send here.
Other preserved values are Keep socket open and Close after receive , but are
currently unsupported.
An authorized of an entry typically found in this field is as follows: Close after sent
CFG_Connectionstring_DATA_str
This field specifies the connection string, which contains information used for establishing a
connection to the Messenger_DATA database. A complete connection string contains all the
information needed to establish a connection. The connection string is a series of keyword/
value pairs separated by semicolon.
The connection string depends on which Database Engine is used.
There are six possible connection strings supported for the DECT Messengerapplication:
1. for Ms Access:
For authorized, Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\SOPHO
Messenger@Net\Mdb\Messenger_DATA.MDB
2. for SQL 2005 Express (residing on Messenger PC):
eKERNEL_SITE parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 331