User's Manual

7 eWEB
8 eSMTP_server
9 eDMSAPI
Byte 4-5 01-9 9 Input program sequence number
Byte 6-7 Alarm sequence number
An authorized of an entry typically found in this field is as follows: 1110101
Msg_Msg_str
This field describes the format of the result message after internal processing through
eKERNEL. When no records are specified, received messages are transmitted as is to the
destination party. When definitions are found in the MESSAGE_FORMAT table, an internal
preprocessing can reformat the message, either completely replacing the message or
manipulating the message by means of a prefix and suffix.
Refer to Table 49: eKERNEL_MESSAGE_FORMAT sample data on page 327 for authorizeds
on message formats. Messages are built based upon fixed characters and the [message]
special value, which is replaced by the original message text, as follows:
• A format AA [message] translates Hello world into AA Hello world.
• A format FIRE ALARM translates Hello world into FIRE ALARM.
An authorized of an entry typically found in this field is as follows: see
Table 49:
eKERNEL_MESSAGE_FORMAT sample data on page 327.
Msg_VBVoice_phrase_str
The default value for this field is blank. The value is currently ignored, unless the output
program eVBVOICE is used. Since eVBVOICE sends its outbound information through audio
and not through alphanumeric information, translation of a message into an audio file needs
to be defined.
In the current release there is no text-to-speech facility in the product. Therefore, each alarm
identifier needs to be predefined with a prerecorded audio wave file. Refer to the eVBVOICE
documentation for more information.
An authorized of an entry typically found in this field is as follows: EvacuationSET.wav
Msg_descr_str
This describes the conversion process. This field is informational only.
Table: eKERNEL_MESSAGE_FORMAT
326 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]