User's Manual

An authorized of an entry typically found in this field is as follows: 0
INPGM_Default_DEV_OUTPGM_str
The field INPGM_AutoCreateGRP_b allows you to indicate whether auto-create is enabled or
disabled.
If O is specified, the value INPGM_Default_DEV_OUTPGM_str is ignored.
If -1 is specified, the value INPGM_Default_DEV_OUTPGM_str is used to indicate the output
program that is associated with the device that is created automatically in the
eKERNEL_DEVICE. A typical value is C933, which assumes that all devices that are
automatically created for this input program are to be processed by the C933 application.
See the eKERNEL_DEVICE information for a list of supported output programs.
An authorized of an entry typically found in this field is as follows: C944
INPGM_Default_DEV_OUTPGM_facility_str
The field INPGM_AutoCreateGRP_b allows you to indicate whether auto-create is enabled or
disabled.
If O was specified, the INPGM_Default_DEV_OUTPGM_facility_str is ignored.
If -1 was specified, the INPGM_Default_DEV_OUTPGM_facility_str is used to indicate the
facility that is associated with the device that is created automatically in the eKERNEL_DEVICE
table. A typical value is C4050, which assumes that all devices that are automatically created
for this input program are sharing the same facility C4050. As a result, auto-creation is typically
reserved for environments where the peripherals are somewhat standardized.
See
Table: eKERNEL_DEVICE on page 277, and Table: eKERNEL_DEVICE_FORMAT on
page 289, for more information on defining device facilities.
An authorized of an entry typically found in this field is as follows: C4050
INPGM_Descr_str
This field allows you to enter descriptive text, which is visible in the eKERNEL module, in the
associated input program and in some web-based functions.
An authorized of an entry typically found in this field is as follows: Televic Protocol Convertor
Table: eKERNEL_INPGM
322 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]