User's Manual

5 eCSTA
6 eIO
7 eWEB
8 eSMTP_server
9 eDMSAPI
Byte 4-5 01-9 9 Input program sequence number
Avaya recommends using five digits to uniquely identify an input program. Using this method,
the identifier indicates the site, area, input program application, and sequence number.
An authorized of an entry typically found in this field is as follows: 11101
INPGM_Site_id_n
This field specifies the number of the site, as defined in eKERNEL_SITE table. In most cases
this is 1.
An authorized of an entry typically found in this field is as follows: 1
INPGM_Area_id_n
This field specifies the number of the area, as defined in eKERNEL_AREA table. In most cases
this is 1.
An authorized of an entry typically found in this field is as follows: 1
INPGM_Appl_str
This field indicates the specification of the input program. There is a predefined list of supported
values; each of them refers to a module.
In the current release only the following values are supported: eAPI, eCAP, eESPA, eSNMP,
eVBVOICE, eCSTA, eIO, eWEB and eSMTP_server. Other modules can be added to the list
in future releases.
The recommended naming convention dictates the use of an appropriate value for the field
INPGM_id_n. The eCAP and eAPI input programs have identities, such as xx1xx, and the
eVBVOICE input programs have identifiers xx4xx and so on.
An authorized of an entry typically found in this field is as follows: eAPI
Table: eKERNEL_INPGM
318 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]