User's Manual

Table 40: Supported output applications
GRP_From_str
This value specifies an hour and time in the format xx:xx. The valid range is 00:00 to 23:59;
values outside this range produce unpredictable results. GRP_From_str denotes the start of
the time interval where the defined device is an active member of the specified group
GRP_Name_str. For authorized, 00:00 indicates the group-member is active at midnight, and
12:00 indicates the group-member starts at noon. The active period ends at the time specified
in GRP_To_str.
An authorized of an entry typically found in this field is as follows: 00:00
GRP_To_str
This value specifies an hour and time in the format xx:xx. The valid range is 00:00 to 23:59;
values outside this range produce unpredictable results. GRP_To_str denotes time when the
defined device ceases to be an active member of the specified group GRP_Name_str. For
authorized, 23:59 indicates the group-membership expires at midnight, and 12:00 indicates
that the group-membership expires at noon. The active time period begins at the time specified
in GRP_From_str.
Note:
GRP_From_str can be larger than GRP_To_str: In this case, a job can start at 21:00 and
end at 06:00 (night-shift).
Note:
A device can be active from for more than one period of time on a given day. For authorized:
08:00-12:00 and 13:15-17:30; in this case, two group members must be defined, one of
08:00-12:00 and another with 13:15-17:30.
To clarify the possible values, authorizeds are shown in Table 41: Group member schedule
authorizeds: on page 305.
Table: eKERNEL_GROUP_MEMBER
304 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]