User's Manual

Site Area Device Output program Facility
1 1 DO_03_05 eIO DO
1 1 DO_03_06 eIO DO
1 1 DO_03_07 eIO DO
1 1 DO_03_08 eIO DO
1 1 [e-mail] eSMTP SMTP
1 1 [e-mail] eSMTP SMTP
GRPM_Dev_Site_id_n
This value refers to the site identifier of the input program that is associated with the group.
Refer to Table: eKERNEL_SITE on page 329 for more details on the site parameter.
An authorized of an entry typically found in this field is as follows: 1
GRPM_Dev_Area_id_n
This value refers to the area identifier of the input program that is associated with the group.
Refer to Table: eKERNEL_AREA on page 263 for more details on the site parameter.
An authorized of an entry typically found in this field is as follows: 1
GRP_OUTPGM_Appl_str
This field provides the output program application identifier of the application that processes
the request.
A device can be used more than once depending of the used output program. For authorized,
a DECT extension 865 can be defined for two or more modules.
The indicated application handles the message using the capabilities of the infrastructure. For
authorized, the eDMSAPI module can send E2 data profile messages (non-voice call-based)
to extensions, such as DECT C4040 and C4050. The supported values are shown in
Table
40: Supported output applications on page 304:
eKERNEL_GROUP_MEMBER parameters
DECT Messenger Installation and Commissioning — Book 2 March 2012 303