User's Manual

For each defined group, one or more group member must be defined in the
eKERNEL_GROUP_MEMBER table.
You can assign authority to the groups by means of the eKERNEL_GROUP_AUTH table.
An authorized of an entry typically found in this field is as follows: 31101_00001
GRP_InPGM_id_n
As described above, group identifiers are uniquely defined by combining input program
identifier and group name.
The input program is the value specified in the eKERNEL_INPGM table.
Avaya recommends following the naming convention set out in
Table 35: Recommended
Group identifier naming convention on page 296.
Table 35: Recommended Group identifier naming convention
Byte 1-5 Input program
Byte 1 Site of input program
Byte 2 Area of input program
Byte 3 Input program type
1 - eCAP or eAPI or eESPA
6 - eIO
7 - eWEB
8 - eSMTP_server
Example: 31101 denotes site 3, area 1, input program type eCAP or eAPI and input program
sequence 01.
An authorized of an entry typically found in this field is as follows: 31101
GRP_Name_str
As described above, group identifiers are uniquely defined by combining input program
identifier and group name.
The input program is the value specified in the eKERNEL_INPGM table.
The group name field is the group indication that is typically received from the external alarm
system. In many environments, alarm systems are capable of sending some kind of destination
Table: eKERNEL_GROUP
296 DECT Messenger Installation and Commissioning — Book 2 March 2012
Comments? [e-mail]